PMTws - Gorjuss Heartless tutorial

this tag tutorial was made using artwork by Suzanne Woolcott HERE
after March 2013 her tubes will no longer be available to purchase :(
scraps used SW Artist series 03 (mini kit) by Cora @ Pimp'd Designs
available HERE
Mask by VixPSP HERE
Mask 122 by  Designs By Vabs  HERE
............................................
open up a new canvas 515 x 570

open up frame2 resize 70% Image - free rotate right by 90
then free rotate by 3% left
copy and paste as a new layer onto your canvas

open up frame1 resize 70%
copy and paste as a new layer onto your canvas

copy and paste ribbon2 as a new layer resize by 50%

add drop shadow

open up paper2 copy and paste as a new layer
go to Layers - arrange - send to bottom

then apply DBV Mask 122
by going to Layers - load/save mask from disk 
choose the correct mask and click load or apply.
depending on your version of PSP.


go to Layers - merge group

recolour by going to Adjust - hue saturation an adjust the sliders
see screenshot below


then resize by 95%

copy and paste the gorjuss image resize by 90%

slide this image beneath frame layers

open paper5

apply mask to paper direct vix mask 348
by going to Layers -  Load/save mask  - load mask from disk
choose the correct mask 
 

click load
go to - Image resize 70%

add artist copyright
add your name, I used the font Two Turtle Doves 
set to size 72 - bold.
choose background colour HTML no. #365354
forefround null.

Roman - Shades of grey tutorial - how to have one section in colour

this tag was made using a tube is by Roman Zaric called Lidia available HERE

I have used a freebie scrap kit called

 Shades of grey by me from my scraps blog HERE
 MASK No.144 by Weescotslass her blog is HERE

.........................................................................................

open frame cluster3 resize by 70% using smartsize

resize all layers UNCHECKED

open up paper6 resize by 70%

click inside the 2 frames, holding down the shift key while clicking inside each frame

then go to modify - expand by 2 and then copy and paste the paper as  new layer
then go to selections invert and hit the delete key to remove the excess

selections none

slide the bg paper layer underneath the frame layer

copy and paste the paper again as a new layer 

then go to layers - load/save mask - load mask from disk
apply the weescottslass mask 144
using these settings.

go to layers - merge group.

then resize this mask layer by 90% using smartsize

arrange this layer to the bottom, by going to layers - arrange - send to bottom

open up element 24 resize by 50% usin smartsize
 copy and paste as a new layer slide this beneath the frame and bg paper layer arrrange to the right

add a drop shadow

open up element 23 resize by 60%
 copy and paste as a new layer slide this beneath the frame and bg paper layer, arrange to the left

add a drop shadow

make the frame layer the active layer by clicking on it,
then click inside the frame, again and copy and paste tube or image of choice as a new layer
then go to selections - invert
and and hit the delete key to remove the excess,

if using the same roman tube as i did resize it by 50% for the left close up image
if using the gorjuss tubes like below, then resize by 70%

once done go to selections - none


add other elements from the kit,
i used ele 15 resize by 70% add a drop shadow and slide under the frame

add ele10 and add a drop shadow

ribbon4 resize by 70%
click inside the heart shape ribbon, hold the shift key down to get all the heart
go to selections - modify - expand by 2

go to selections invert

then make the tube/image layer the active layer

then go to adjust hue and saturation and move the sliders to zero
 see settings below

go to selections none

make the ribbon the active layer again and add a drop shadow

repeat the process by adding either another image or tube for the right side of the frame.

here is another version of the same tag...
once done save it as a .png with a unique name and you are done!

Nothing Is Impossible - Gorjuss

*old tut moved from tut site*For this tut I am using the fantastic artwork of Suzanne Woolcott

Her tubes are available for PSP usage from her store
For this tut you will need PSP, Dsb flux Plugin
And Toadies Plugin
my wordart HERE
small brushes of choice
mask from vixpsp
under goodies- masks i used Vix_mask20  from set 1
but why not treat yourself to all of them they are fab.
unzip your masks and place them in your psp masks folder
 ....................................................

open a new canvas 600 x 600
flood fill with white

add a new raster layer and flood fill with a darkish colour from your tube

go to Layers - Load/save mask - load mask from Disk

and select the mask called - Vix_mask20 with the following settings. .

  

go to Layers  - merge - merge group

duplicate this layer
go to Effects - plugins - dsb flux- linear transmission and use the following settings.

 

now click on the original star and 

go to Effects - Plug-ins - Toadies - what are you use  the following settings...

 

now add a drop shadow to this layer using the following settings

 

copy and paste the love and patience word art as a new layer,

resize as necassary, duplicate and place where happy...

copy and paste as a new layer your tube of choice and resize as necessary... 

add a drop shadow 

add your name.... i used Twelve Ton Goldfish font a gradient using red and the neutral tone from my tube. (red foreground - neutral background) using the following settings in the material pallette.

 

*optional* add a new raster layer just above the white background 

and add some small brushes as desired....

add your copyright info and you are done xx

Princess - how to add sparkles

This animated tag tutorial was written by me Diane Knight on 09/02/07 any resemblance to any other tut is purely coincidental

To complete this tut you may need a good understanding of psp. You will also need the following plugin:
Alienskin Xenofex 2 and animation shop

 ............................................................

For this tut I am using the artwork of Suzanne Woolcott you will need to buy a licence to use this artists work at her store HERE

Open a blank canvas 500 x 500 flood fill with white
(you can always crop later if needed)
Choose 2 colours from your tube - foreground being the darker and background being the lighter.
I used bank gothic size 48 stroke 2 kerning -175
Write out the word PRINCESS then stretch it out to the size that you feel looks right
Duplicate it
On the copy add the following inner bevel - see below

Add a drop shadow I used H2 V2 opacity 50 blur 5
change the colour to lilac

Select the original go to Adjust – blur- Gaussian blur with the settings below

Then Effects – Texture Effects – Blinds with the settings below then again with horizontal unchecked.

Next add your tube resize if needed and add a drop shadow
Add your artist's copyright and your name.
Crop if necessary

ANIMATION

X out your 2 bottom layers as shown below.

Merge visible - this should merge all your top layers leaving your white background and your blurred layer.

Click on your blurred layer and add the Alienskin xenofex 2 constellation effect with the following settings:

Uncheck your white background and MERGE ALL copy and paste into Animation Shop.

Back into PSP - click the undo button 2 times, then repeat the constellation effect twice more, copying and pasting into Animation Shop. Each time remembering to click the random seed button.

You now should have 3 frames in Animation Shop - save as a gif and your done.

Angelic - animated - how to light effect to text

 





*old tut moved from my tut site*
This tutorial was written by me Diane Knight on 6th November 2007
 any resemblance to any other tut is purely coincidental

For this tut I am using the fantastic artwork of Suzanne Woolcott
Her tubes are available for PSP usage from HER STORE
you will need PSP, plugin - penta.com get it from HERE
*Download the one called Garbage Collections WinEMac*
brushes used were from Suzanne woolcott's website HERE
i used the ones called Gorjuss checks
font used was Angelica get it from HERE

............................................................
before we start download all the supplies and add the brushes  to your brushes folder so they show up when needed
open a new canvas 600 x 600
flood fill with white
copy and paste your chosen tube as a new layer onto your canvas
resize as necassary i resized this tube by 90% twice then went to
adjust - sharpness - sharpen...

as when you resize it can blur your image a little. now add a drop shadow I used:

vertical 1 horizontal 1 opacity 80 blur 5 and a very dark purple colour selected.

then Add the word 'Angelic' using the angelica font with these settings    i used a dark purple for the foreground colour and lilac for the background colur.
now stretch it up and out a little so it fills the canvas a little better.

add a new raster layer, and slide it underneath your tube layer ..
now click on your airbrush tool(where the paintbrush tool is)
and select the brush called gorjuss check 3 with the settings as below in the screenshot

now select a colour to compliment your tube i chose lilac again, and click on your canvas a couple times till your happy with the look.
now go to Effects - plugins - penta.com - Jeans with the folowing settings.
  click on your text layer with your magic wand tool click inside the letters while holding down the SHIFT key at the same time. to select all the letters at the same time.
now with the whole word selected
go to Effects - Illumination Effects- Sunburst with the following settings.
     

now go to Selections None - go to Edit-copy merged

then paste into Animation shop as a new animation

  back to PSP
click undo twice
(this should make your text selected again and get rid of the sunburst you did before)
go to Effects - Illumination Effects- Sunburst
with the same settings as before but this time change the horizontal to 50
 

then Selections None - go to Edit-copy merged

then paste into Animation shop after current frame

back to PSP

click undo twice

go to Effects - Illumination Effects- Sunburst

with the same settings but this time change the horizontal to 75  

then Selections None - go to Edit-copy merged

then paste into Animation shop after current frame

ok now while in animation shop go to Edit- Select all

then go to Animation - frame properties and change the display time from 10 to 25 

  add your name if desired..save as a gif and your done.

 thanks for trying my tutorial

Diane xx

 

All about the Stripes by Tiki

Tiki has a new tut for you using my Emo kit available at 

Twilight scraps here under Candys Treats -  Emo, 

this tut also uses artwork by Gorjuss....

check out the tut on her blog HERE,

Emo by Jolie

Check out the new tutorial called Emo from Jolie here

 using my Emo kit, which is Exclusive to Twilight Scraps HERE

Gorjuss Love - new tut from Goldie

Check out the new tutorial from Goldie HERE 

 using my Emo kit, which is Exclusive to Twilight Scraps HERE

Gorjuss I heart Goth tutorial from Schnegge

 

Schnegge has a super cute tutorial using my Exclusive Emo kit from Twilight Scraps

check it out on her blog here

Thanks so much hun xoxo

Tweet this by Bru

Bru made this adorable tut using my Tweet this kit and a Gorjuss tube

check out her blog HERE

the fabulous Kirsty has a very cute tutorial using my pink to make the boys wink kit,

using artwork by suzanne woolcott, (gorjuss) check it out on her site HERE

thanks so much hunnie xxx

Spring Kisses by Gina

Gina made a tag and tut using my Bug Me kit



TAG AND TUT HERE